01Field irrigation
Switch a compatible pump while working along the field, with less walking back to its switch.
HONEST · PUMP CONTROL SOLUTIONS
Remote pump control solutions
Fewer trips. More time for the work.
At the field or away from site, choose a way to switch your pump that fits your daily work.
BUILT AROUND YOUR DAY
Control that fits the site.
01
02Garden watering
Operate a compatible watering pump from the work area, or discuss timed control with a 4G setup.
03Distribution boxes & cabinets
Integrate suitable control equipment with a contactor and circuit protection for the installation.
Irrigation and garden images are application illustrations; the cabinet photograph was supplied with the product materials.
TWO WAYS TO REACH YOUR PUMP
Nearby control. Or a connection from afar.
Stay with the field work.
Use a matching handheld remote to switch the receiver. Local operation remains available on the unit.
HT-9220KG
- Control
- Handheld remote + receiver button
- Supply
- AC 75–265V
- Pump / motor
- Below 2000W
- Reference range
- 1000–5000m in open areas, by SKU
- Connection
- Radio remote; no mobile network needed for handheld switching
Choose the remote and antenna configuration for your site. Buildings, terrain and interference can reduce range.
Keep the site within reach.
Use the App or WeChat to switch equipment, check operating data, schedule run times and share device access.
HT-2401G
- Control
- App / WeChat + local buttons; optional remote
- Supply
- AC 36–400V
- 220V pump / motor
- Below 10kW
- 380V equipment
- An AC contactor is required
- Connection
- Overseas 4G version; confirm local network and service
Both the controller and phone need an available network. Confirm destination compatibility before ordering.
Select by the actual motor, starting current and protection requirements. A relay component rating does not determine the load capacity of every installation.
HOW IT WORKS
A clear path from command to pump.
- Handheld remote
- Matching receiver
- Compatible pump
A radio command controls the receiver. Select range, load and antenna for the installation.
- App / WeChat
- 4G controller
- Compatible pump circuit
The control service communicates with the 4G unit. Use a contactor where required; 380V equipment needs one.
Control-path overview only. It is not a wiring diagram.
SEE IT IN ACTION
See the controls. Understand the operation.
FROM SELECTION TO START-UP
Four steps to get started.
Confirm the equipment
Share the pump voltage and nameplate if available. Check the motor load and protection with your installer.
Choose the control method
Choose handheld range or 4G connectivity based on where you work and the site conditions.
Install and configure
Have a qualified electrician follow the actual unit markings and manual. Pair the remote or configure the supported service.
Test at the site
Verify local and remote operation, then check range or network, timers and sharing as applicable.
START WITH YOUR ROUTINE
Where will you control the pump?
Choose a starting point. Final selection depends on your pump and installation.
YOUR STARTING POINT
Let’s start with your application.
Tell us where the pump is, how you want to control it and the market you serve. You can add power and nameplate details later.
Country, customer type, one contact method and requirements are enough to start. Pump power, voltage, quantity and photos are optional.
BEFORE YOU CHOOSE
Questions worth answering.
For installers and dealers, begin with the site conditions and the actual pump.
Will every handheld kit reach 5000m?
No. HT-9220KG has 1000, 2000, 3000 and 5000m open-area configurations. Real range varies with obstacles, terrain and interference.
Can 4G control work in every country?
Confirm local network compatibility and App, WeChat and platform availability. A suitable network connection is needed at the controller and phone.
Can I connect a 380V pump directly?
The HT-2401G requires an AC contactor for 380V equipment. The HT-9220KG supply is AC75–265V. Let your electrician confirm the complete control and protection circuit.
Will it prevent dry running automatically?
This page does not specify dry-run or water-level protection. If your installation needs these functions, include them in the enquiry so the complete solution can be confirmed.
Can I ask for samples or a dealer proposal?
Yes. Use the sample or distribution enquiry entry and include your market and product requirements. Quantities and equipment photographs are optional.
BUILD YOUR PUMP CONTROL RANGE
A solution for your site. A range for your market.
Tell us how your customers use their pumps. Let’s discuss selection, samples and distribution.
HONEST · Pump control selection
Handheld Remote or 4G Pump Control: Which Should You Choose?
Compare practical range, network requirements, shared access, multi-device control and scheduling to choose for on-site work or off-site management.