Handheld remote
Separate ON / OFF buttons switch equipment within the effective range.
HT-2301Y · Wireless remote control socket
Power control.
Within reach.
From the watering point to the garden lights. Switch compatible pumps, lights and plug-in equipment with the matching handheld remote or the receiver button.
1000m
Open-area range¹
10
Remotes supported, up to²
2
Remote + local control
75–265V AC
Operating supply
¹ Up to 1000m in open, unobstructed conditions; obstacles and radio interference reduce actual range. ² Up to 10 compatible remotes can be paired; included quantity depends on the ordered kit.
01 / ON & OFF
Two ways to switch.
One simpler routine.
Receiver button
Use the power button on the receiver when you are next to the equipment.
1000m
Open-area range¹
02 / Features
Less walking.
Control from your work area.
Watering, checking equipment or arranging lighting need not mean returning to the socket every time. The 1000m figure is an open, unobstructed reference; walls, vegetation, terrain, interference and placement affect usable range.
- Test reception at the intended operating position
- Extend the remote antenna as instructed
- Confirm the equipment state before leaving the site
03 / Applications
One control idea.
Many everyday uses.
For equipment with compatible supply, connections and actual load. These scenes illustrate possible uses; confirm the equipment nameplate and starting current when selecting a version.
01
Garden irrigation
Switch a compatible pump from your watering point.
02
Water transfer
Start and stop suitable pumping equipment from the work area.
03
Tank filling
Switch manually while checking water level; no automatic level control.
04
Pond aeration
Remotely switch power to compatible aeration equipment.
05
Outdoor & holiday lights
Reach the power without reaching the socket.
06
Lamps & appliances
Make awkward power points easier to operate.
04 / ABS
Made for
practical placement.
An ABS housing, hanging loop and protective outlet cover. Choose a suitable placement and protection arrangement for the actual installation.
IP65Enclosure protection
ABSHousing material
Textured side grip
A practical grip for everyday handling.
Molded hanging loop
Arrange a suitable hanging position for the site.
Metal plug contacts
Confirm the plug and outlet for the supplied version.
Hinged outlet cover
Helps protect the outlet area when not in use.
05 / Setup
Connect. Plug in.
Take control.
01
Connect compatible equipment
Switch equipment off, check supply, plugs and complete-unit load requirements, then connect to the receiver outlet.
02
Plug into a matching supply
Insert the input plug securely into a compatible power outlet. Protect all connections outdoors.
03
Test ON / OFF
Pair first if needed. Test remote and local switching where you can observe the equipment.
06 / 10 ×
One receiver.
Shared everyday control.
Pair up to 10 compatible remotes for convenient control from different operating positions. Pairing capacity does not mean 10 remotes are included; confirm the ordered kit.
Enter pairing mode
Hold the receiver button for more than 3 seconds. The indicator flashes 3 times.
Add a remote
Press any remote button. The indicator flashes 5 times to confirm pairing.
Clear paired remotes
Hold the receiver button for more than 10 seconds. The indicator flashes 5 times.
Steps follow the supplied material; use the instructions accompanying your version. Clearing removes paired remotes.
07 / HT-2301Y
The specifications.
In one place.
- Model
- HT-2301Y
- Operating supply
- AC 75–265V
- Supply frequency
- 50 / 60Hz
- RF options
- 315MHz / 433MHz
- Reference housing size
- 5.5 × 4 × 8.2cm
- Housing material
- ABS
- Relay component
- 40A
- Control
- Matching handheld remote + receiver button
- Pairing capacity
- Up to 10 compatible remotes
- Reference range
- Up to 1000m, open and unobstructed
- Enclosure protection
- IP65
40A is the relay component rating, not a plug, outlet or motor-load rating for the complete unit. Confirm allowable unit current, equipment power and starting current for the supplied version.
Can it reach 1000m through walls?
No 1000m through-wall range is guaranteed. This is an open, unobstructed reference. Buildings, trees and radio interference affect reception; test the actual site.
Can it directly control every pump?
The 40A relay figure alone cannot determine suitability. Check complete-unit ratings, the pump nameplate, starting current and connections before use.
Can it be exposed to rain or immersed?
The material specifies IP65 enclosure protection, subject to the supplied configuration. Plugs and connections still need appropriate water protection. Do not immerse.
Does it offer App control or timers?
The supplied material describes handheld remote and receiver-button control, not App or timer functions. For mobile control, sharing or scheduling, enquire about HT-2401G.
Will it stop automatically when a tank is full?
This model provides manual remote switching, not automatic water-level control. Observe the level while filling and operate the switch as needed.
Are 10 remotes included?
Ten is the maximum pairing capacity, not the default accessory quantity. Confirm included remotes and plug/outlet versions with the order.
09 / OEM & ODM
A practical addition
to your product line.
For pump and irrigation dealers, electrical and hardware wholesalers, and lighting or equipment suppliers. Discuss versions, applications and packaging for your customers.
OEM / ODM
Discuss product and branding needs
Custom packaging
Confirm packaging for your project
One-year warranty
Lifetime repair service; confirm applicable terms
HT-2301Y
Start with your equipment and market.
Have these details ready to help confirm a suitable HT-2301Y configuration.
01Destination country02Equipment nameplate and load03Plug and outlet types04Operating distance and quantity
View original product material ＋
Original material is in English; page copy is available in five languages.